Port 10631 PRINTOPIA
Port 10631 is the IANA-assigned printopia port for Printopia Serve (TCP).
What is port 10631 used for?
Port 10631 is assigned to printopia and uses TCP. The IANA registry describes the service as “Printopia Serve”. It sits above the registered range, where most numbers are transient client ports. A fixed high port is worth documenting precisely because tooling often assumes the default.
Ports are the transport-layer address a service listens on. A client that wants to reach printopia connects to port 10631. If nothing is listening, the connection is refused. That is why a port conflict appears whenever two processes try to bind the same number.
Use the commands below to confirm whether port 10631 is actually in use before you change firewall rules. Blocking the port stops new inbound traffic at the firewall, but it does not stop a local process from listening, and it does not remove the service from the machine.
Source: IANA Service Name and Transport Protocol Port Number Registry. Registered assignee: [Decisive_Tactics_Inc].
Check and block port 10631
Copy-ready commands for the protocols assigned to this port. Run the check first, then block only what should not be reachable.
Check on Linux
sudo ss -tlpn 'sport = :10631'Check on Windows
Get-NetTCPConnection -LocalPort 10631 -State Listen -ErrorAction SilentlyContinueBlock with UFW
sudo ufw deny 10631/tcpBlock with iptables
sudo iptables -A INPUT -p tcp --dport 10631 -j DROPThese commands are examples for a typical host. Check the listener before you change firewall rules, and persist iptables rules with iptables-save or netfilter-persistent. On Windows, use Windows Defender Firewall or New-NetFirewallRule for persistent blocks. The iptables rules here cover IPv4; mirror them with ip6tables if IPv6 is enabled.
Is port 10631 safe to expose?
This port is not on our curated list of services with a widely exploited profile. Exposure is only safe when the listening service is intended, patched and protected by a firewall. Keep the listening service patched and remove it if unused. A default-deny firewall policy with explicit allow rules is still the safest baseline.
Where port 10631 is usually used
Most traffic on port 10631 falls into these scenarios. The demo below is a safe way to confirm the listener before you change anything.
- Print clients submitting jobs to a shared printer or print server.
- Print servers advertising queues to workstations on the LAN.
- Troubleshooting jobs stuck in the spooler or a blocked driver port.
Check the printer port
A TCP probe tells you whether the device is reachable; driver-level errors come later.
nc -vz 192.168.1.50 10631Common problems with port 10631
Connection refused or timed out
Refused usually means the host is reachable but nothing is listening on port 10631. A timeout more often means a firewall drop, a wrong host or a service bound to a different interface.
Port already in use
Find the process holding the port with sudo ss -tlpn 'sport = :10631' or sudo lsof -i :10631. Stop that process or configure it to bind another port; killing it without identifying it can take down a production service.
Firewall rule did not survive a reboot
UFW and Windows Firewall keep rules across restarts. Raw iptables rules do not: save them with iptables-save or the netfilter-persistent package, and re-apply after upgrades that reset the ruleset.
The port is blocked but still reachable
A firewall rule filters inbound traffic; it does not close the listener. Confirm with the check command above and bind the service to 127.0.0.1 when only local clients need it.
Port 10631 at a glance
| Port number | 10631 |
|---|---|
| Service name | printopia |
| Transport protocol | TCP |
| Category | Printing |
| Range | High port (10001–65535) |
| Risk level | Standard/Low |
| Registered assignee | [Decisive_Tactics_Inc] |
| Registry description | Printopia Serve |
| Source | IANA Service Name and Transport Protocol Port Number Registry |
Frequently asked questions
What is port 10631 used for?
Port 10631 (PRINTOPIA) uses TCP. Printopia Serve.
How do I check if port 10631 is open?
On Linux run `sudo ss -tlpn 'sport = :10631'`. On Windows run `Get-NetTCPConnection -LocalPort 10631 -State Listen -ErrorAction SilentlyContinue` in PowerShell. If the port is open, the output shows a process listening on port 10631; empty output usually means nothing is bound to it.
How do I block port 10631?
With UFW run `sudo ufw deny 10631/tcp`. With iptables run `sudo iptables -A INPUT -p tcp --dport 10631 -j DROP`. Persist the iptables rules with your distribution's netfilter-persistent or iptables-save tooling so they survive a reboot.
Is port 10631 safe to expose?
This port is not on our curated list of services with a widely exploited profile. Exposure is only safe when the listening service is intended, patched and protected by a firewall. Nevertheless, keep the listening service patched and remove it if unused. A default-deny firewall policy with explicit allow rules is still the safest baseline.
Related ports
- Port 10548 · serverdocsApple Document Sharing Service
- Port 10800 · gapGestor de Acaparamiento para Pocket PCs
- Port 8609 · canon-cpp-discCanon Compact Printer Protocol Discovery
- Port 10805 · lpdgLUCIA Pareja Data Group
- Port 7228 · citrixuppCitrix Universal Printing Port
- Port 40404 · sptxSimplify Printing TX
Primary data: IANA Service Name and Transport Protocol Port Number Registry.
Last reviewed 2026-10-30 · Methodology · About · Privacy